Tech Tip: Replacing AWD Rear-Wheel Bearings on Subaru Vehicles – UnderhoodService

Tech Tip: Replacing AWD Rear-Wheel Bearings on Subaru Vehicles

When replacing rear-wheel bearings on 1994 all-wheel-drive Legacy, Impreza and SVX vehicles, be certain not to over torque the lateral link bolt that secures the two transverse suspension arms to the wheel bearing housing. Do not air gun the bolt off. The proper torque is probably less than you think.

When replacing rear-wheel bearings on 1994 all-wheel-drive Legacy, Impreza and SVX vehicles, be certain not to over torque the lateral link bolt that secures the two transverse suspension arms to the wheel bearing housing. Do not air gun the bolt off. The proper torque is probably less than you think. Since the torques are different for the various models and years, refer to the appropriate manuals for the proper specs for the vehicle on which you are working. If this bolt is overtorqued, it can deform the housing and may lead to a repeat failure of the wheel bearing.

If you encounter a repeat failure of a rear-wheel bearing occurring in an unreasonably short amount of miles, the housing may have been deformed during the first repair. Replacement of the bearing and the housing may be required.

There are some other things to remember when working on the wheel bearings. Never loosen or tighten the axle nut with the weight of the vehicle on the wheel. The vehicle should be in the air with the wheel removed prior to loosening or tightening the axle nut. If this precaution is not taken, damage to the wheel bearing may occur. The axle nuts are not reusable. A new nut should be used with the new bearing. Always ensure that the new bearing is properly packed with suitable wheel bearing grease. The grease that the bearing is shipped with is not sufficient. Always use the proper special tools to install the bearing and torque the axle nut to the correct specifications.

Technical service bulletin courtesy of ALLDATA.

For additional information, visit www.alldata.com.

You May Also Like

Mullen Continues Commercial EV Dealer Expansion in Midwest

New franchise partners Ziegler Truck Group and Range Truck Group will focus on the Pacific Northwest and upper Midwest regions of the U.S.

Emerging electric vehicle manufacturer Mullen Automotive, Inc. announced the addition of zero-emissions commercial vehicle dealers, Minnesota-based Ziegler Truck Group and Washington-based Range Truck Group, which are a part of the Ziegler Companies distribution network. As Mullen’s new franchise partners, RTG and ZTG will cover national and regional fleet opportunities for Mullen commercial EVs with a focus on the Pacific Northwest and upper Midwest regions of the U.S., according to the latest press information.

Non-Competes: A Non-Starter, Says FTC

The FTC’s rule is set to take effect in about four months, unless it is blocked by legal challenges.

Navigating The Legal Landscape with Succession Planning

Planning for a successful business handover means doing things by the book.

PRT Launches 59 New Complete Strut Assemblies

Extending PRT’s product portfolio in North America, the new release represents nearly 12M vehicles in new coverage.

We Want Your Thoughts On Electronic Power Steering

Your opinion matters to us and can be profitable for you too!

Other Posts

Genesis Expands EV Availability to 37 States

GV60, Electrified GV70 and Electrified G80 are now available at select retailers in Alabama, Kansas, Oregon and Rhode Island.

Beyond the Warranty

What does it take to keep a car going for 120,000, 180,000 or 250,000 miles? The key is maintenance and inspection. 

Check The TSBs!

With the complexity of today’s modern vehicles, as technicians, we are going to have to stay on top of our game.

HVAC Heat Pumps

In theory, heat pumps can be three to four times more energy-efficient than conventional electric heaters.