Tech Tip: Diagnose and Repair ABS on Ford Trucks – UnderhoodService

Tech Tip: Diagnose and Repair ABS on Ford Trucks

As you are all very well aware, occasionally anti-lock brake system (ABS) malfunctions can be very complicated and hard to diagnose. In the case of some late-model Ford truck anti-lock brake systems, however, several malfunctions may have a very simple solution.

As you are all very well aware, occasionally anti-lock brake system (ABS) malfunctions can be very complicated and hard to diagnose. In the case of some late-model Ford truck anti-lock brake systems, however, several malfunctions may have a very simple solution.

Some 1997-1999 Ford Expedition, F-150, F-250 (2WD models only), or 1998-1999 Lincoln Navigator (2WD models only), can exhibit such diverse symptoms as: ABS lamp illumination, false ABS cycling at low speeds, increased brake pedal effort at low speeds, or any combination of the above. These problems all may be caused by an incorrectly installed front wheel speed sensor, a damaged wheel sensor, or a chipped or broken tooth on the tone ring resulting in reduced input to the ABS Electronic Control Unit (ECU). Refer to the following Service Procedure for details.

SERVICE PROCEDURE
1. If the ABS lamp is on, retrieve and record any diagnostic trouble codes.

NOTE: Usually codes C1145, C1148/1234, C1155, C1158/1233 or C1222, which are all related to a front wheel sensor malfunction, will be displayed.

2. Inspect both front sensor wires for tension due to improper routing (Figures 1 and 2). Make sure that the white clip, attached to sensor cable is properly located on protrusion of the upper control arm (Figure 1). Replace the sensor assembly if needed.


3. Carefully inspect the sensor wire at the sensor head. Look for any cracking or distress. Replace the sensor assembly if needed.

4. Inspect the tone ring for dents, flat spots, chips or other irregularities.

5. Inspect both front sensor bodies for improper seating to the spindle housing. The sensor bracket flange should be completely flush to the spindle housing (Figure 3). If any gap is present, replace the sensor assembly with a new front wheel speed sensor.



PARTS INFORMATION

• Front wheel Speed Sensor — (RH) XL3Z-2C204-BB.
• Front wheel Speed Sensor — (LH) XL3Z-2C205-AB.

If sensor replacement is required, all surfaces, including the hole where the sensor body is inserted, must be free of rust build-up. Use a wire brush to thoroughly clean all surfaces where the sensor seats. That’s all there is to it. Make certain that you clear any ABS codes that were displayed and test-drive the vehicle to confirm your repairs.

Written by ALLDATA Technical Editor, Rich Diegle. Rich is an Advanced Engine Performance Certified and ASE Master Technician with an Associate of Arts degree in automotive technology and 22 years of dealership and independent shop experience.

For additional information, visit www.alldata.com.

You May Also Like

Is Training For The Sake Of Training Always Worth It?

Technology changes every day. Are you keeping your techs in top shape?

We all know the value of training - or do we? Is it always valuable? Is it alway effective? Should it always take top priority?

Naturally, you want to say yes, but experts say the RIGHT training for your team's needs is what's really crucial.

This episode of Talking Shop with ShopOwner focuses on the challenges of training technicians and service advisors in the automotive industry. The guests, Dave Boyes and Ron Shanas from Today's Class, discuss the importance of training in a rapidly changing technological landscape and the difficulties shop owners face in finding time for training amidst busy schedules.

Comprehensive Guide to Serpentine Belt and Drive System Maintenance

Properly maintaining the entire drive system prevents premature belt wear and system failure, ensuring customer satisfaction and vehicle reliability.

Randy Breaux, Group President, GPC North America, Talks to AMN Drivetime

At NAPA, “Breaux Knows” business relationships, ABCs to avoid, and serving the automotive professional.

Understanding Customer Clunking And Clicking Complaints

Can Your Techs Diagnose and Repair Modern Axle Complaints?

BMW Spark Plug Replacement

Here are a few things that you need to know before replacing spark plugs in a BMW.

Other Posts

Blink CEO to Present at Energy, Power & Renewables Conference

The event is scheduled for June 17 at 1:10 p.m. ET.

How Modern Car Sensors Optimize Performance and Emissions

Learn how Standard ensures accuracy, speed, and durability in their sensors to maximize engine performance and efficiency.

Tool Time Podcast: Lumileds

Nadine and Eric sit down with Lumileds’ Aubry Baugh to discuss all the professional lighting solutions the company has to offer.

Diagnosing Intercooler Boost Trouble Code P0299

The criteria for setting the code is very basic.