Tech Tip: Aiming Headlights Requires Special Alignment Equipment – UnderhoodService

Tech Tip: Aiming Headlights Requires Special Alignment Equipment

Accurately aimed headlights are essential for safe nighttime driving. Accurate adjustment is also essential to keep a vehicle's beam pattern out of the eyes of oncoming drivers. Once headlights have been set, their alignment should not change unless the vehicle has been collision damaged, or the front or rear ride height of the vehicle has changed ....

Accurately aimed headlights are essential for safe nighttime driving. Accurate adjustment is also essential to keep a vehicle’s beam pattern out of the eyes of oncoming drivers. Once headlights have been set, their alignment should not change unless the vehicle has been collision damaged, or the front or rear ride height of the vehicle has changed.

Headlights should be aimed so the low beams are straight ahead with respect to the vehicle centerline, and the low beam pattern cuts off flush with the hood line (to eliminate glare to oncoming traffic). This can be done by parking the vehicle 25 feet from a wall, turning on the low beams, and measuring the brightest areas on the wall to make sure they are both straight ahead and no higher than the headlights on the car. Adjustment screws in or on the headlight housings can then be turned as needed to adjust the aim.

A more accurate method is to use headlight aiming equipment that is placed in front of the vehicle to measure beam alignment. Some optical headlight aimers require a floor track while others do not. The device identifies the hot spots in the beam pattern to determine beam slope and angle (horizontal and vertical alignment). This allows for a more precise adjustment. This type of equipment is usually only required in states that have vehicle safety inspections.

Equipment for this purpose should meet SAE J599 and J600 standards for headlight alignment.

You May Also Like

Ford Adaptive Cruise Control Alignment Process

Follow these steps for proper horizontal alignment of the cruise control module radar sensor.

• 2010-2017 Taurus, Explorer, Edge, Flex, Fusion, MKS, MKX, MKT, MKZ

• 2015-2017 F150, Mustang, and MKC 

• 2017 Super Duty, Escape, and Continental

This is information on setting up and completion steps for proper horizontal alignment of the cruise control module (C-CM) radar sensor.

Chrysler’s Totally Integrated Power Module Simplifies Circuits

The symptoms of a failing TIPM can vary depending on the vehicle. Check out your options for this repair.

Trakmotive Tech Tip: Window Regulator Installation

Here are eight tips to make your next window regulator replacement easier.

Multi-Spark Ignition Systems

You may have seen the stories about plasma or laser ignition systems that promise to give new life to the internal combustion engine. But while these ignition systems have yet to make it to market the latest ignition innovation still uses a coil and spark plug.

VIDEO: How Modules Manage Alternator Power

Andrew Markel discusses power flow through the electrical system on a vehicle, and how the modules help provide the right amount of power to different components. Sponsored by Valeo.

Other Posts

Power Window Regulator and Motor Service

Power windows are great as long as they roll up and down when commanded to do so.

Caring For AGM And Flooded Car Batteries

Faulty battery cables, if loose, corroded, or damaged, can lead to power drainage.

Battery Charging and Diagnostics

Here are six tips to use when diagnosing a vehicle with a dead battery. 

Power Window Regulator Replacement

Blindly replacing a window regulator and motor assembly may not solve a customer’s problem.