Ford Archives - UnderhoodService
Ford Pro, Xcel Energy Collaborate on EV Charging Port Installation

The effort aims to install 30,000 EV charging ports by 2030 for business fleets across Xcel Energy’s service territories in the U.S.

Ford 2.0L EcoBoost Rattle Noise

To correct the condition, follow the Service Procedure to replace the flexplate, transmission fluid pump & torque converter.

FORD Active Exhaust System Concerns

These concerns may be caused by an improperly seated exhaust system.

Ford No Crank/No Start

Some 2020 Transit vehicles may exhibit an open master fuse in the high current battery junction box

Ford No Crank/No Start, Multiple Warning Lights and/or DTCs

Customers may state they’ve experienced intermittent no crank/no start conditions in their vehicle.

Ford Illuminated Malfunction Indicator Lamp

Replace the crankcase pressure sensor/tube assembly and reprogram the PCM.

Repair and Upgrade Solutions for Early-Model Ford® Broncos®

The Ford® Bronco® is America’s original sports-utility vehicle, built for fun and distinguished by its toughness and durability. So when you need to upgrade or repair a Bronco, choose top-quality parts that match the rugged strength of these trucks. Specifically, the axle shafts, axle bearings, ball joints, and ring and pinion gearing in Broncos built

Ford Power Steering Inoperative After Collision Damage Repair

Here are the case details behind a message center displaying a “STEERING LOSS STOP SAFELY” warning message.

FORD Explorer High-Speed Cooling Fan Motor RELAY Overheating

A damaged non-functional relay, causing the fan to never turn on may lead to engine overheating at idle.

2020 Ford Edge Front Camera Calibration (Video)

This is the best way to perform a front camera calibration on a 2020 Ford Edge. Sponsored by Hunter Engineering.

Ford Modulus Power Steering Pump Unboxing (VIDEO)

There are lots of similar looking steering filters in the market but looks can be deceiving. Sponsored by CARDONE.

Ford: Permanent Diagnostic Trouble Codes (DTC’S)

A Permanent DTC can only be cleared by the module strategy & cannot be erased by clearing with a scan tool.