Rust can develop between the axle and the ABS speed sensor ring. The rust acts like a wedge and causes the ring to crack, creating a false or erratic signal that results in intermittent ABS operation.
While there are many times where you will be able to repair a vehicle's brakes without a scan tool, you only have to run into one car that needs this to make it worth having. The reality is that if your customer's vehicle is 10 years old or newer, there's...
For all 2012 model year vehicles, stability control is standard. For model year 2008, the majority of vehicles sold were sold with ABS and optional stability control. Most of these systems have something in common, sensors that measure the dynamics of the vehicle and the intentions of the driver.
The 2004-2009 Mazda3 is based on the Ford global C1 platform, shared with the European Ford Focus and Volvo S40. Nothing is really groundbreaking about the brake system. But, not paying attention to the details can end in a post brake job comeback.
The Chevrolet Trailblazer is based on the GMT 360. The brake system on the Trailblazer is not groundbreaking by any means, but there are some intricacies technicians should be aware of on this common platform. The front brakes utilize dual piston calipers with phenolic pistons. The most important thing to...
The vehicle operator may experience an illumination of the Electronic Stability Program (ESP) lamp on the vehicle instrument cluster. The ESP lamp illumination may be due to the following Diagnostic Trouble Codes (DTCs)
Each time the ignition is turned on and the vehicle is driven at about 16 mph, the ABS/VDC system performs a “Self-Check” to confirm components of the ABS/VDC system are operating correctly.
Some customers may report a slight clunk, bang or jolt from the front of the vehicle. This concern will most likely occur during the vehicle's first forward movement, and after the vehicle sits for a few hours and/or a cold soak. This is a normal operating noise of the Anti-Lock...
Signs of a worn wheel hub bearing vary in severity. Some may be difficult to detect, leading to damage before corrective action can be taken. The timeframe in which damage occurs is linked to driving conditions and/or the mechanical practices that were followed at installation. Noise is a classic sign...
Some customers may comment that the ABS light is illuminated. This may be caused by the wiring harness coming in contact with the A/C compressor pulley.
