Sun Tool Co.’s Speed Pro Arbor Nut System Automatically Aligns and Tightens a Rotor or Drum – UnderhoodService
Connect with us
Close Sidebar Panel Open Sidebar Panel

News

Sun Tool Co.’s Speed Pro Arbor Nut System Automatically Aligns and Tightens a Rotor or Drum

Sun Tool Co. offers the Speed Pro self-aligning, hand-tightened, self-torquing arbor nut system. It solves the problem of over torquing an arbor nut on rotors or drums. Use on any popular brake lathe with a one inch arbor and 1" X 8 UNC L.H. or 7/8" X 9 UNC L.H. threads.

Advertisement

Sun Tool Co. offers the Speed Pro self-aligning, hand-tightened, self-torquing arbor nut system. It solves the problem of over torquing an arbor nut on rotors or drums.

Advertisement

Use on any popular brake lathe with a one inch arbor and 1” X 8 UNC L.H. or 7/8” X 9 UNC L.H. threads.

The Speed Pro arbor nut automatically aligns and tightens a rotor or drum to a brake lathe and helps prevent a bent arbor. Never search for a self-aligning spacer again! It’s built in! Eliminate come backs due to pulsation caused by mis-aligned rotors or drums. The Speed Pro model numbers 609329 for 1" threads and 609330 for 7/8" threads come complete with a removable handle. Model numbers 609332 for 1" threads and 609333 for 7/8" threads are kits that also include three variable-length arbor spacers and special mounting posts. These kits are designed to meet the demands of any busy shop.

Advertisement

The Speed Pro self-aligning arbor nut is shown here with the patented Rotor Pro 709320 automotive floating centering cone precision brake lathe adapter set with new patented neoprene rubber inserts.

For additional information on products offered by Sun Tool Co., visit www.suntool.com.

Advertisement
Click to comment
Connect
UnderhoodService