Rotor & Resurfacing Response: The Industry Responds to the Midas/Glad Controversy – UnderhoodService

Rotor & Resurfacing Response: The Industry Responds to the Midas/Glad Controversy

The response to last month's article on the settlement of the Midas and Mike Glad lawsuit in California was overwhelming, and the conversation went in some unexpected directions.

What was even more amazing was the scores of people downloading the 100-page complaint against Glad and Midas. It soon became the aftermarket’s version of the Oprah Book Club. 

The number one controversy the story generated was on rotor resurfacing when new brake pads are installed. Some readers said that they do not machine rotors if they are within specification, while others said they always machine rotors. Even some dealership technicians chimed in to say they always machine rotors when replacing pads. Overall, I would say the response was 50/50. Rotor resurfacing is going to be a hot topic many brake pad and rotor manufacturers are trying to quantify if dissimilar friction materials lead to longer braking distances and noise.

While many people responded to “dance on the grave” of Midas and Glad, some came to defend him and his long career in the automotive repair business.

But, what really surprised me was the anger expressed towards the California Bureau of Automotive Repair (BAR) and how they conducted the investigation. The most common comment was about how long it took to conduct the investigation and how they did not inform Glad and Midas they were under investigation or even help to correct the problem for more than three years.

Many readers said the media attention was motivated by California’s Attorney General, Jerry Brown, using the case to make a name for himself as the state’s gubernatorial race shapes up.

But what was most glaring to many readers of the 100-page complaint was the ignorance of the BAR to procedures, equipment and product used by non-dealer shops. They clearly missed the mark with on-the-car brake lathes and brake fluid testing. The documents also exposed the BAR’s high regard for OEM service information and how they interpret it as the final word in auto repair.

Even with the bad press shops have received from this incident, many shops and franchises are learning and examining their own internal processes.

The web page with the story at brakeandfrontend.com is one of the most viewed articles for the last six-months. It also received a record number of comments that can be found with the original article here.

You May Also Like

Being Happy Gets In The Way of Being Successful

Bryce Kenny says his greatest satisfaction comes from helping others to find the courage to chase their dreams.

When the workday is over, the tools are put away, the computers have gone to sleep, the customers have driven away safely and the last tech has clocked out, washed up and left the parking lot, do you ever just take a minute to put your hands on your hips, look around your shop, take a deep breath and think, “Is this really all there is to life?”

Quality Triumphs!

We interact with our cars differently and today’s parts quality matters more than ever.

Putting Yourself First For Safety

Shop safety policies and procedures are only as good as those following them. Make sure you’re watching out for you!

It Ain’t Bragging If You Can Back It Up

For the great work they do, shop owners like Harrison Keyes talk less about “me” and more about “us.”

Why Is NHTSA Involved With RTR?

A closer look into NHTSA’s involvement with RTR.

Other Posts

Do OEM Service Bays Offer Opposition or opportunity?

With great power, of course, comes great responsibility.

How Effective Are Non-Competes

NCAs restrict workers, hinder innovation, and impact employment options.

How Effective Are Non-Competes?

NCAs restrict workers, hinder innovation, and impact employment options.

Is Your Shop Being Robbed Right Now?

How prepared are you for the bad guys?