Racing Report: NASCAR Belt Technology is ‘On Track’ – UnderhoodService

Racing Report: NASCAR Belt Technology is ‘On Track’

Goodyear engineer Mike Gregg has played a part of the four-straight championship trophies the No. 48 team has hoisted — not to mention the great racing all NASCAR teams entertain fans with every weekend.

s necessary to succeed.

mike gregg (left) says the race track is a great testing ground for belt durability. he’s shown here at the track with jeff andrews, director of engine operations at hendrick motorsports.We’re talking teamwork, dedication and resources — the common ground great teams share.

His name might not be as recognizable as Jimmie Johnson or Chad Knaus, but Mike Gregg is one of those innovative resources. He’s played a part of the four-straight championship trophies the No. 48 team has hoisted — not to mention the great racing all NASCAR teams entertain fans with every weekend.

Originally from Belfast, Northern Ireland, Gregg has been an engineer with Veyance Technologies Inc. — the exclusive manufacturer of Goodyear Engineered Products — for more than 40 years now.

Gregg began working at Goodyear’s Northern Ireland plant in 1969. In 1983, the company transferred him to the United States to work in research and development at the company’s Akron, OH, headquarters, where he helped develop belts for camshafts and accessory drives.

“Belts were my specialty,” said Gregg, an easily likeable Irishman whose every other word retains the lyrical accent of his homeland.

Rising Through the NASCAR Ranks
Goodyear Gatorback belts have been used by NASCAR teams since the early 1980s, just a couple of years before he relocated to the U.S. And when NASCAR teams began having reliability issues with the NASCAR-approved V-belt system due to increased engine speeds in 2001, Goodyear knew Gregg was the perfect choice to tackle the task.

Back in Northern Ireland, he had raced Rally cars and had a real passion for speed.

“We ran Mini Cooper S’s way back then,” said Gregg. “I always had an interest in racing, so it was a good fit.”

Gregg worked side-by-side with several teams and NASCAR Research and Development to institute a rule change that would allow for Poly-V belts to be introduced in the garage in 2002, helping better support engines that were making more horsepower.

That same year, Hendrick Motorsports’ new start-up team — a group of hungry racers with all the ingredients for greatness — became the test car for the new Poly-V belt system under Gregg’s watch.

Have you guessed by now who the guinea pig was? The No. 48 car driven by Jimmie Johnson, of course.

“He was the new boy on the block back then,” Gregg said.

After the No. 48 car began turning the fastest laps, all Hendrick Motorsports race cars in the stable started running the Poly-V belt setup. It’s been the NASCAR standard ever since. The rest they say is four-peat history, no four-leaf clovers needed.

“They (Poly-V belts) have been very reliable,” stated Gregg. “You don’t hear of belt failures on the track like you used to.”
Gatorback Poly-V belts are available in about 200 different sizes, providing engine builders and crew chiefs with an infinite number of engine configurations.

Now based at Goodyear’s Lincoln, NE, facility, Gregg maintains developmental relationships with all NASCAR team engine builders from Hendrick Motorsports to Richard Childress Racing to Roush-Yates. He frequently travels to team shops in Charlotte, NC, and attends between five to 10 races during the season.

“I’m involved with the guys back at the shop and also like to follow up with the teams at the track, too, to make sure everything under-the-hood is working OK,” Gregg said.

After years of trust-building, teams welcome Gregg’s knowledge like a pot of gold.

Just ask Jeff Andrews, director of engine operations at Hendrick Motorsports. With increased engine demands, greater rpm and higher underhood temps of today’s race cars, Andrews appreciates Gregg’s innovative approach to belt technology.

“What Mike and Goodyear Gatorback have brought to NASCAR belt program technology is very valuable to us in terms of durability,” Andrews said. “Mike’s reached out-of-the-box so to speak on conventional thinking on belt construction and really, really stepped up the belt program here in last 10 years.”

Track-to-Street Benefits
Goodyear Gatorback has been an exclusive NASCAR Performance partner for aftermarket belts since 1997 and a NASCAR Contingency Program sponsor since 2003. Veyance’s weekly “Goodyear Gatorback Fastest Lap” contingency award recognizes the driver with the quickest lap while leading each Cup Series race.

Gregg says the race track is a great testing ground for belt durability. After all, NASCAR drivers are some of the toughest on underhood equipment.

“Engines are always going faster, loads are always going higher,” Gregg explained. “If a belt can be broken, a race-car driver usually finds a way to do it.”

Racing keeps Veyance on the cutting edge of belt technology. The company’s NASCAR partnership is a link between their on-track success and their Goodyear Gatorback consumer line of products. Information gathered at the track is given to Veyance’s R&D facility — the beneficiaries include everyday motorists.

In 2006, Gregg and Veyance worked with Hendrick Motorsports to develop, test and deliver a new Goodyear Gatorback carbon fiber cam drive belt to all NASCAR race teams in just seven weeks to meet increased performance demands. The same technology has also been incorporated into new Goodyear Gatorback Sport ATV belts, snowmobile belts and high performance diesel engines in Europe.

“With belts, nothing can stay still,” Gregg said. “Engines are always getting a little bit faster and you constantly need to keep developing products to meet the need.”

Whether on a race oval or busy highway, everyone who drives an automobile can benefit from Goodyear Gatorback belt technology — and the invaluable knowledge of engineers like Gregg.

For more information, visit www.goodyearep.com. 

You May Also Like

Alternator Testing For No Charge Conditions

Many alternator problems turn out to be nothing more than a bad connection at the alternator or a bad wiring harness.

If only battery voltage is present at the battery on a running engine, does this mean the alternator is “bad?” No, it does not. It only means that the alternator is not charging, but does not reveal why. Therefore, it does not point to a faulty alternator. All too often, the alternator is condemned by technicians due to this test alone. The cause could instead be a module that distributes the power to the vehicle and regulates the alternator.

Understanding Coolants

All-season coolant used inorganic acid technology and worked great for almost 30 years.

Ignition System Do’s and Don’ts

Why do ignition systems give technicians problems when diagnosing ignition-related misfires? The answer is that some technicians use tests that might give inconclusive results or do damage to the coil or drivers inside a module.

Tools To Service Serpentine Belts

Servicing the serpentine belt on some vehicles is a tough task.

Battery Charging and Diagnostics

Here are six tips to use when diagnosing a vehicle with a dead battery. 

Other Posts

Why Does Engine Coolant Need Replacement?

Two specifications can be used to justify replacement — the condition of the additive package & the freezing point.

Engineering Better Belt Systems

An accessory drive belt is always both speeding up and slowing down.

Why Do Timing Chains Stretch?

As the timing chain wears, it can change the timing of the camshaft and crankshaft.

The Impact of Fuel Type on Engine Performance

When fueling, consider engine design, manufacturer recommendations and usage.