PaceSetter Performance Products Offers Direct-Fit Undercar Catalytic Converters For 2005-'07 Subaru Outback, 3.0L Engine

PaceSetter Performance Products Offers Direct-Fit Undercar Catalytic Converters For 2005-’07 Subaru Outback, 3.0L Engine

PaceSetterPaceSetter Performance Products, designers and manufacturers of quality-made, affordably-priced exhaust systems and components, now offers direct-fit catalytic converters for the 2005-’07 Subaru Outback with the 5.7L engine.

PaceSetter Direct-Fit Catalytic Converters utilize mandrel-bent stainless steel tubing for maximum efficiency and CNC-machined thick steel flanges for a factory-like fit and good seal. This ‘under-car’ catalytic converter (#324097-Driver Side & #324098-Passenger Side), a direct replacement for the original equipment unit, has heat shields for the catalytic converter and provisions for the O2 sensors. It is, however, not legal for use or sale in California.

Using EPA-approved catalytic converters for OBD II applications, PaceSetter created an extensive selection of OBD II applications for both foreign and domestic brand cars and light trucks – from Malibu to Camry and BMW to Escape.

You May Also Like

Mazda Tech Tip: Sulfur Or Rotten Egg Smell/Odor From The Exhaust

On some Mazda vehicles, a sulfur smell or rotten egg odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full-throttle acceleration. The sulfur smell is not an indication of an engine concern and will not cause reduced driveability or durability of the engine or any of its emission components.

On some Mazda vehicles, a sulfur smell or rotten egg odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full-throttle acceleration. The sulfur smell is not an indication of an engine concern and will not cause reduced driveability or durability of the engine or any of its emission components.

Poor Engine Performance Linked To Converter Failure

Today’s modern vehicles are equipped with a sophisticated emissions control device. These fail when the engine is not tuned up, as this leads to overworking the converter, overheating and possible clogging.

VIDEO: Detecting Leaks With A Scan Tool?

Andrew Markel explains how a scan tool can be used to detect a leak in the exhaust manifold. Sponsored by Auto Value and Bumper to Bumper.

scan-tool-exhaust-manifold-video-featured
Diesel Exhaust Particulate Filters: How Do They Work, What Do They Do?

The Diesel Particulate Filter (DPF) is a ceramic filter that has thousands of tiny channels or honeycomb-shaped openings that trap the soot onto the channel walls and prevent the particulate matter (down to 1 micron) from exiting out the tailpipe. The honeycombed inner structure is covered with a layer of a chemical catalyst that contains small amounts of precious metals, usually platinum or palladium.

Oxygen Sensor And Catalyst Efficiency

The catalyst efficiency monitor verifies the catalytic converter is operating at a high enough efficiency rating to keep exhaust emissions within the predetermined values. The PCM compares the signals from the upstream and downstream oxygen sensors to determine the state of the converter. These “tests” are called the readiness monitors. 

Other Posts
Direct Fit Catalytic Converters Features and Benefits

Four qualities stand out the most when looking at these catalytic converters. Sponsored by AP Emissions.

EGR, Secondary Air Injection And Emissions Management

EGR systems put a small amount of inert gas into the combustion chamber to control the temperatures.

Catalytic Converter Theft (VIDEO)

In some cases, thieves can remove a catalytic converter in less than one minute. This video is sponsored by AP Emissions.

Catalytic Converter Development Process (VIDEO)

Experts discuss the catalytic converter development process from start to finish. Sponsored by AP Emissions.