MAHLE Clevite Inc. Congratulates 2011 NASCAR Sprint Cup Series Champion Tony Stewart on his 3rd Title, the 64th Straight for MAHLE Clevite – UnderhoodService

MAHLE Clevite Inc. Congratulates 2011 NASCAR Sprint Cup Series Champion Tony Stewart on his 3rd Title, the 64th Straight for MAHLE Clevite

As the manufacturer of Clevite engine bearings used on every NASCAR Champion's engine since the inaugural season in 1948, MAHLE Clevite Inc. is pleased to congratulate the 2011 NASCAR Sprint Cup Series Champion: Tony Stewart.

As the manufacturer of Clevite engine bearings used on every NASCAR Champion’s engine since the inaugural season in 1948, MAHLE Clevite Inc. is pleased to congratulate the 2011 NASCAR Sprint Cup Series Champion: Tony Stewart.

The exciting win over Carl Edwards in the 13th Annual Ford 400 at Homestead-Miami Speedway in Homestead, FL, on Sunday, November 20, 2011, allowed Stewart to capture his third cup series title. Both Stewart’s (Hendrick Engines) and Edwards’ (Roush Yates Engines) motors were built with Clevite engine bearings.

“These two incredibly competitive race cars made Sunday’s race at Homestead-Miami Speedway a race to remember,” said Ted Hughes, manager – marketing, MAHLE Clevite. “We are proud that our Clevite engine bearings, the choice of NASCAR engine builders, have been in the engine of every single NASCAR Champion since the beginning.”

Clevite engine bearings have a long-standing reputation with racing applications that has continued to build over the past decade. In addition to engine bearings, NASCAR teams also turn to MAHLE Clevite for MAHLE Original pistons, piston rings, and Victor Reinz gaskets.

For more information about MAHLE Clevite and its products, visit www.mahleclevite.com, or contact your local representative.

You May Also Like

Tools To Service Serpentine Belts

Servicing the serpentine belt on some vehicles is a tough task.

Servicing the serpentine belt on some vehicles is a tough task. Without the right tools it is almost impossible. Here are six tools your shop needs to make your next belt replacement more productive.

Don’t Fight It
If you are still fighting belt tensioners with 3/8” breaker bar and wrenches, there are better solutions. There are serpentine belt kits that can help you get the right angle and attachment point on a tensioner to remove the old belt and install the new belt.

Battery Charging and Diagnostics

Here are six tips to use when diagnosing a vehicle with a dead battery. 

Why Do Timing Chains Stretch?

As the timing chain wears, it can change the timing of the camshaft and crankshaft.

Carbon Deposits and Direct Injection Engines

The primary cause of these problems is that fuel and added detergents are not hitting the back of the intake valves.

Acura Turbo Engine Service

It is important to check the operation of the solenoids that control vacuum to the actuators.

Other Posts

Subaru EJ25 Head Gasket Problems

Most of the EJ head gasket failures occur around the 100,000-mile mark and start as a slow oil or coolant leak.

Honda Electronic Throttle Body Service Tips

Using care and following OEM procedures will help you to avoid unnecessary parts replacement and comebacks.

New Oil Specifications

Many 0W16 oils have a new donut certification mark on the bottle called API SN-PLUS and SN-PLUS Resource Conserving.

Solving Intermittent Overheating

New cooling systems anticipate and influence changes in coolant temperature.