Knowing Your Numbers Helps Boost Shop Profitability – UnderhoodService

Knowing Your Numbers Helps Boost Shop Profitability

Over the last 22 years, I've been amazed to discover just how many shop owners are lost when it comes to knowing and understanding "the numbers." In order to build a successful auto repair shop, you are going to need to know two sets of numbers: your "financial" benchmarks, and your "operational" benchmarks.

By Bob Cooper, president, Elite Worldwide, Inc.

Over the last 22 years, I’ve been amazed to discover just how many shop owners are lost when it comes to knowing and understanding “the numbers.” In order to build a successful auto repair shop, you are going to need to know two sets of numbers: your “financial” benchmarks, and your “operational” benchmarks.

Without a clear understanding of these benchmarks, it ­becomes quite challenging for shop owners to pinpoint where they are falling short of their goals, and where improvements need to be made. Far too many times, I’ve seen shop owners ­finally start monitoring these numbers closely, and quickly realize that for years they haven’t been charging enough for parts, have been overpaying their employees, have been operating inefficiently, etc.

There’s no doubt about it: A clear understanding of your shop’s financial and operational benchmarks is critical to effective auto repair shop management.

Since your parts costs are one of your largest expenses, it’s something you need to monitor continuously. At Elite, our top clients spend no more than 52% of the dollars they bring in through their parts sales, on parts costs. This means that if they bring in $40,000 in parts sales by the end of the month, the cost of those parts should not exceed $20,800 ($40,000 in parts sales x 52% = $20,800 parts costs.) If you find you are spending more than 52% of your parts sales on parts costs, then you need to take a good, hard look at how you price your parts, any parts that are being replaced at no charge, your warranty failures, purchasing habits and the possibility of theft.

When it comes to your direct labor (the cost of your techs), the top shops we work with spend no more than 40% of the dollars they bring in through labor sales, on technician pay. This means that if they bring in $40,000 in labor sales by the end of the month, their technician payroll does not exceed $16,000 ($40,000 in labor sales x 40% = $16,000 labor cost).

You also need to pay close attention to the cost of your service advisors, and here at Elite, we like to see that number at no more than 8% of your total parts and labor sales. For example, if your shop generates $80,000 in monthly auto repair sales, your advisors should not be costing you more than $6,400 ($80,000 total sales x 8% target = $6,400 advisor cost).

You’ll need to watch your “operational” benchmarks very closely as well. One key indicator is your labor hours per repair order, and our top clients consistently generate at least 2-2.5 hours of labor sales with their average repair order. If you are not seeing 2-2.5 hours per repair order at your shop, you need to review your vehicle inspection process, what’s being recommended to your customers and the declined services.

As a shop owner you also need to pay close attention to your technicians’ “efficiency” rate. This is a powerful key indicator that will show you just how good your techs are at getting the work done in a fast and effective way. It’s easy to discover your efficiency rate by simply dividing the hours you billed for the repair, by the amount of time it took your tech to complete the job.

For example, if you bill a customer 2 hours, and your tech gets the job done in 1.5 hours, he would be 133% efficient (120 minutes billed/90 minutes to complete the job = 1.33, which is 133% efficient). 

The top shops are typically operating at an overall efficiency rate of 125+%. There are a number of things that can bring down the efficiency of the technicians in your shop, including a lack of experience, the lack of proper technical training, and one of the biggest culprits, the wrong compensation ­programs.

And lastly, after you pay all of your expenses, the money that is left over is for you. In business we call that profit, and the top shops will typically earn a profit of 15-20% of sales. So if your shop is generating $80,000 in monthly sales, in most cases, you should be able to earn $12,000-$16,000 per month in taxable ­income. The good news is, if you know your numbers, and if you never put money ahead of people, you should be able to generate these profits in a ­professional and ­ethical way. 

Since 1990, Bob Cooper has been the president of Elite Worldwide Inc. (www.EliteWorldwideStore.com), an ethics-based company that helps both struggling and successful shop owners take their businesses to new levels through one-on-one coaching from the industry’s top experts. The company also offers shop owners sales, marketing, and management seminars, along with service advisor training. You can contact Bob at [email protected], or at 800-204-3548.

You May Also Like

Dorman Launches New Repair Solutions

Among the new releases are Dorman OE FIX repair solutions designed to help save time, money or increase reliability.

Dorman Products Inc. has announced the release of 400 new motor vehicle parts, including what the company says are 130 aftermarket exclusives. The new products advance Dorman’s mission of providing repair professionals and owners greater freedom to fix passenger, commercial, and recreational vehicles with internal combustion, hybrid, and electric powertrains. Among the new releases are a dozen Dorman OE FIX repair solutions designed to help save time, save money, or increase reliability.

Opus IVS Announces Launch of Master Class Free Training Series

Seminars and coursework focused on advanced vehicle technologies for those wishing to advance their skills.

Autoshop Solutions Partners With Turnkey Marketing

Both companies only focus on the automotive aftermarket and have the same goal of keeping those bays full.

AP Emissions Releases January New Part Number Update

The release includes direct fit EPA converters covering more than 6.6 million vehicles in operation.

.01 Micron Superstar Filter

The .01 Micron SuperStar Filter includes a differential pressure gauge and comes with mounting brackets.

Other Posts

Dayco Expands H-D Belt Kit Line

Dayco says six new SKUs cover hundreds of thousands of Class 8 fleet vehicles on the road today.

asTech’s Patented Rules Engine Now Available

asTech users, insurance carriers and their customers can be confident with the accuracy and cost of the recommended scan type.

Standard Motor Products Announces Pro Training Power Hour

The free, live/virtual technical series presented by Standard’s professional trainers will be geared toward technicians.

MAHLE Aftermarket Expands Cylinder Head Gasket Portfolio

New part numbers for Asian and domestic models join more than 12,000 part numbers for 900,000+ applications.