Indirect Tire Pressure Monitoring Systems Making A Comeback On Some Imports – UnderhoodService

Indirect Tire Pressure Monitoring Systems Making A Comeback On Some Imports

Indirect Tire Pressure Monitoring Systems (TPMS) are the systems that do not have air pressure sensors inside the tires. Rather, they detect a low tire by comparing relative wheel speeds via the Anti-lock Brake System (ABS) wheel speed sensors. New systems are taking advantage of better wheel speed sensors and modules to make indirect systems work. Indirect TPMS began making a comeback in 2011 on all Audi models. The highly popular Honda Accord switched to indirect TPMS for the 2013 model year.

Indirect Tire Pressure Monitoring Systems (TPMS) are the systems that do not have air pressure sensors inside the tires. Rather, they detect a low tire by comparing relative wheel speeds via the Anti-lock Brake System (ABS) wheel speed sensors. When a tire loses air, its diameter decreases slightly.
 
Older indirect TPMS are not as sensitive to changes in tire pressure as direct systems that ­actually monitor the air pressure inside the tire, but they are not as expensive ­either. An indirect TPMS is a relatively ­affordable add-on to a vehicle if it’s already equipped with ABS. Even so, the vast ­majority of vehicles that have TPMS use ­direct systems rather than indirect.
 

Federal law requires the TPMS to alert the driver if the pressure inside a tire has dropped more than 25% below the recommended inflation pressure. The same rules apply to direct and indirect TPMS. Many vehicles abandoned indirect systems for ­direct systems to meet the federal mandate.
 
One of the weaknesses of older indirect ­systems is that they may not turn on the warning light if all the tires are underinflated by a similar amount. If the recommended pressure is 32 psi, but all the tires are 24 psi (down 25%), the system won’t know there’s a problem because all the tires will be rotating at the same speed when the vehicle is being driven.
 
New systems are taking advantage of better wheel speed sensors and modules to make indirect systems work. Indirect TPMS began making a comeback in 2011 on all Audi models. The highly popular Honda Accord switched to indirect TPMS for the 2013 model year. The 2013 Mazda CX-5 is now also using an indirect TPMS. Some of the VW Golf platform vehicles have switched to an indirect TPMS. Most of these models have the ­optional ABS and stability control system.
 
But even the newer systems suffer from the ­inability to read the tire pressure when the ­vehicle is sitting still. 
Indirect TPMS applications include:
 
•  Audi 2011-’14
•  BMW X5 2002-‘05
•  Honda Accord 2013-’14
•  Lexus LS430 2004-‘06
•  Lexus RX330 2004-‘06
•  Mazda CX-5 2013-’14
•  Mercedes C-Class 2007
•  Mercedes SLK 2005-‘07
•  MINI Cooper 2004-‘07
•  Toyota Corolla 2005-‘07
•  Toyota Matrix 2005-‘06
•  Toyota Solara 2004-’06
•  Toyota Highlander 2004-‘06
•  Toyota RAV4 2004-‘05
•  Volkswagen GTI 2007 and 2010
•  Volkswagen Jetta 2005-‘07
 
WHERE TO FIND RESET PROCEDURES
All of these applications use a similar technology and strategy to detect a low tire, but there is no common reset procedure. Toyota is probably the best, with only one simple reset procedure for all of its indirect TPMS (though a slightly different procedure is used on the Lexus models).
 
With so many different reset procedures, it’s ­important to make sure you’re using the right ­procedure for the vehicle you’re servicing.  
 
TPMS reset procedures may also be found in the vehicle owner’s manual (if it hasn’t been lost). Open the glove box and check the index in the owner’s manual for any TPMS information.
INDIRECT TPMS RESET PROCEDURES
As a rule, most indirect TPMS have a RESET button for recalibrating the system. A reset is typically ­required after adding air to a low tire, after changing or servicing a tire, or after rotating the tires on a ­vehicle.

You May Also Like

Chrysler’s Totally Integrated Power Module Simplifies Circuits

The symptoms of a failing TIPM can vary depending on the vehicle. Check out your options for this repair.

TIPM is a fuse box, relay box and electronic module all in one. The electronic module is connected to several data networks.  For engineers, the module reduces a lot of wiring under the hood and passing through the firewall. The TIPM also increases the functionality of a component by allowing several inputs to control one component. 

Trakmotive Tech Tip: Window Regulator Installation

Here are eight tips to make your next window regulator replacement easier.

Multi-Spark Ignition Systems

You may have seen the stories about plasma or laser ignition systems that promise to give new life to the internal combustion engine. But while these ignition systems have yet to make it to market the latest ignition innovation still uses a coil and spark plug.

VIDEO: How Modules Manage Alternator Power

Andrew Markel discusses power flow through the electrical system on a vehicle, and how the modules help provide the right amount of power to different components. Sponsored by Valeo.

VIDEO: Checking Key Fob Signal And Operation

Doug Kaufman discusses how to diagnose key fob issues, from fixing low signal to learning new fobs after they are lost or failed. Sponsored by Blue Streak.

Other Posts

Power Window Regulator and Motor Service

Power windows are great as long as they roll up and down when commanded to do so.

Battery Charging and Diagnostics

Here are six tips to use when diagnosing a vehicle with a dead battery. 

Caring For AGM And Flooded Car Batteries

Loose, corroded or damaged battery cables make poor electrical contact and can cause a battery to run down.

Understanding The Autel ITS600 Functions (VIDEO)

Joe Keene goes over the functions the Autel ITS600 has to offer. This video is sponsored by Autel.