Hyundai Tech Tip: Throttle Position Sensor Driveability Symptoms – UnderhoodService

Hyundai Tech Tip: Throttle Position Sensor Driveability Symptoms

The Throttle Position Sensor (TPS) output signal is an important input for both the engine and transaxle control modules. A malfunctioning TPS may result in numerous symptoms.

The Throttle Position Sensor (TPS) output signal is an important input for both the engine and transaxle control modules. A malfunctioning TPS may result in the following symptoms:
• Unstable idle;
• Uneven throttle response;
• Slip and shock during the 1-2 and 2-3 shift on Automatic Transaxle (ATM)-equipped vehicles;
• Erratic ATM shifts with possible shift flare (engine RPM increases during shifts);
• Check that the engine light is on (light may go off, but the code will remain stored); and
• TPS-related code stored in the ECM and/or TCM.

Affected Models:
• 1996-1999 Accent;
• 1996-2000 Elantra; and
• 1997-2000 Tiburon.

Repair Information:
1. Check to see if the following three conditions are met:
• The TPS is suspected;
• The ECM/TCM has no codes stored; and
• The TPS has the words “DAE SUNG” molded on the part.
If so, conduct the following diagnostic procedure:
• The vehicle must be idling (with all accessories turned off).
• Push on the side of the TPS connector toward the dash panel. The force used should be firm enough to slightly deflect the TPS housing, but not enough to damage or break anything.
• If the TPS is not operating properly, the engine will surge in response to your push.
• If the Hi-Scan Pro or HDS is used to record the TPS output, the above procedure will show that the TPS output increases toward 5V when the connector is pushed.
2. If the ECM has a TPS-related code stored (with or without the MIL on), replace the TPS.

Technical service bulletin courtesy of IDENTIFIX.

For additional tech tips, visit www.identifix.com.

You May Also Like

ASE Practice Tests Available Online

You can get a good idea of what to expect by adding the official ASE practice tests to your study plans.

The National Institute for Automotive Service Excellence (ASE) is reminding those preparing for ASE certification, or recertification, to consider taking the official practice tests as part of their test preparation process.

The official ASE practice tests cover the ASE automobile tests (A1 through A8), four medium/heavy truck tests (T2, T4, T6 and T8), automobile service consultant test (C1), automobile maintenance and light repair test (G1), automobile advanced engine performance specialist test (L1) and automobile parts specialist test (P2).

TransFix: What Happens When a Transmission Has a Harsh Shift?

Learn about the additives and conditioners that can rejuvenate the seals and eliminate varnish in the passages of the valve body.

AACF Celebrates 65 Years Serving the Aftermarket

AACF will be announcing more details about this commemorative fundraiser April 1st.

Tesla Model 3 TPMS Service

Resetting and programming TPMS sensors for a Tesla is a lot like any other vehicle, and the challenge is still the same: keeping the light off.

Bendix Releases Technical Materials for ADAS Support

They are designed to help technicians properly set up, inspect, and diagnose several components integrated with ADAS.

Other Posts

Dayco Adds Almost 30 Part Numbers in March

The 29 new part numbers will be available by the end of March for distributors interested in adding to their product coverage.

New Orleans RTA Selects New Flyer Electric Hybrid Buses

The New Flyer buses will be equipped with the Allison eGen Flex electric hybrid propulsion system.

Can You Jumpstart an EV?

First thing’s first: Find the LV battery, which could be anywhere in the vehicle.

Belts and Pulley Alignment

A misalignment of the plane of the belt can occur when a pulley is not parallel to the other pulleys on the belt drive system.