Honda Civic Tech Tip: Inaccurate Fuel Gauge Reading – UnderhoodService

Honda Civic Tech Tip: Inaccurate Fuel Gauge Reading

At any fuel level, the fuel gauge reading drops by 1/4 tank, or three to four graduation marks. In some cases, the fuel gauge indicates "E" and the low fuel warning light is on. After driving for several minutes, or cycling the ignition switch off/on, the fuel gauge returns to the correct reading.

Vehicles:
2003-2004 Civic 4-door EX and LK – VIN starts with 1HG or 2HG.

Symptom:
At any fuel level, the fuel gauge reading drops by 1/4 tank, or three to four graduation marks. In some cases, the fuel gauge indicates “E” and the low fuel warning light is on. After driving for several minutes, or cycling the ignition switch off/on, the fuel gauge returns to the correct reading. This problem is intermittent and it affects only Civics with Visteon gauge assemblies.

Probable Cause:
The software specification for calculating the current fuel level is incorrect.

Corrective Action:
Replace the gauge assembly.

Repair Procedure:

  1. Tilt the steering wheel all the way up.
  2. Remove the three upper cover mounting screws from the lower steering column cover, then tilt the steering wheel all the way down and remove the column covers.
  3. Remove the two mounting screws from the instrument panel trim. Gently pull on the bottom of the trim to release the two clips and the two hooks. Carefully pull the trim out of the dashboard.
  4. Remove the three mounting screws from the gauge assembly and gently pull it away from the dashboard. Unplug the blue and green 22P connectors from the top of the assembly, then remove the gauge assembly.
  5. Install the appropriate new gauge assembly.  Note:
    • Laws governing odometer repair, replacement or servicing may vary from state to state. Questions concerning state law should be directed to your applicable state agency, DMV office or an attorney.
    • Refer to the Honda Service Operations Manual (Section 2.24) for warranty policies and procedures regarding odometer servicing and replacement.
  6. Reinstall all removed parts.

For additional information, visit www.mitchell1.com.

Technical service bulletin courtesy of Mitchell 1.

You May Also Like

Do Technicians Need Tips?

Asking for a tip would not go over well with your future customers.

You have probably seen many more businesses and retailers asking for tips during checkout. It is the screen typically seen before you approve the charge. I started to think about what would happen if shops would try asking for tips when customers picked up their vehicle. 

Asking for tips would probably not have gone over too well with customers in the past or in today’s constantly shifting tipping culture. I think it is a question of how people think technicians are compensated. If you are paying 20% gratuity on a meal, it is understandable. But, technicians and shops provide more than a service, they provide expertise and tools that should be compensated through the number of hours billed, not a tip from the customer. 

What Constitutes A Quality Wheel Hub Assembly?

Discover key factors to consider for quality hub assemblies and how they impact vehicle performance and longevity.

Needs Come First When Choosing Aftermarket Or OE

It’s essential to understand the differing needs of manufacturers, shops, technicians, and consumers.

Caring For AGM And Flooded Car Batteries

Faulty battery cables, if loose, corroded, or damaged, can lead to power drainage.

Jump Starting an EV

If an EV with a full battery won’t start, here’s how you can get it up and running.

Other Posts

Ford 3.5L EcoBoost Turbocharger Oil Leaks

Ford has revised the service information for the inspection and pinpoint tests of the turbocharger and oil lines.

BP Pulse Opens Gigahub in Houston

It is the first BP Pulse-branded Gigahub in the US and opened to the public on April 2.

Service Opportunities Still Exist With EVs

Like all ICE vehicles, you need the correct tools, parts and to follow the proper service procedures when servicing EVs. This video is sponsored by The Group Training Academy.

Wheel Bearing Shortcuts

When you’re installing a wheel speed sensor on a hub unit, never ever remove it from the original unit. Sponsored by Auto Value and Bumper to Bumper.