When you’re installing a wheel speed sensor on a hub unit, never ever remove it from the original unit. Sponsored by Auto Value and Bumper to Bumper.
Hey, I got a great shortcut for you. If you're working on wheel hubs, if you have one where you're dealing with a harness for the wheel speed sensor that may be behind a fender liner, has all these horrible Christmas trees on it to get in and out from behind areas that you've never seen, well, you can just simply take the old out and then put it in the new and get rid of the new harness. Do not ever use the shortcut. It is a bad thing to do because you are destroying the calibrated air gap that was done at the factory, and this is very precise, done with computers. By removing the wheel speed sensor from one and putting it in another, you've just changed everything completely and you're gonna cause yourself a comeback. Do you wanna know why? Well, it's gonna cause an erratic wheel speed sensor code or issues with the air gap.
The harder the water, the more likely the water pump is to develop a leak.
This condition may be caused by an internal circuit board fault within the throttle body.
The criteria for setting the code is very basic.
Autel introduced the MaxiCharger Megawatt Charging System satellite launch plan at the Nordic EV Summit 2024.
Todd Baldridge measures success by how well his team benefits from being together.
Neal is an automotive recycler servicing the Central Illinois market with a population of approximately 1.3 million people.
It offers up to 80% reduction in CO2 emissions over traditional AGM batteries, in many cases, Clarios said.
FLO’s technology confirms identification, authorizes the charging session and activates billing without any additional action from the driver.