Delphi Announces New Part Numbers To Fuel Management Portfolio – UnderhoodService

Delphi Announces New Part Numbers To Fuel Management Portfolio

Delphi Product & Service Solutions has announced the addition of 205 new fuel modules, three new electric fuel pumps, eight new universal fuel pumps and 54 new hanger pump assemblies to its fuel management portfolio, covering more than 38 million vehicles built from 1965 to 2014, including Ford, Chrysler, Dodge, Chevrolet, Mercury, Volvo, Toyota, Nissan and Hyundai applications.

Delphi fuel modules, pumps and hanger pump assemblies are designed to deliver an immediate, uninterrupted flow of fuel to the engine’s fuel rail and injectors at the specified system pressure, resulting in more efficient operation. Delphi fuel modules, pumps and hanger pump assemblies are designed to withstand harsh alcohol fuel blends and provide dependable, long-lasting performance, quick pressure rise and quiet, efficient operation, the company states.

Additionally, where required, fuel assemblies include integrated fuel level sensing components that deliver an accurate reading of the fuel level in the tank to the fuel gauge. Fuel modules typically include a fuel vapor pressure sensor that detects any leaks in the fuel tank or associated evaporative emissions components.

Inventory is available now. Visit go.delphi.com for more information.

You May Also Like

What Causes Direct Fuel Injectors To Clog?

In the case of a direct fuel injector where the tip is exposed to the combustion event, carbon can stick to the nozzle and cause a bad spray pattern, because carbon searches for other carbon.

In the U.S., the quality of the fuel we put into our vehicles is very high. By the time it travels through the fill neck, it has been filtered twice at the station. Before it gets to the fuel rail, it has been filtered by a sock in the tank and a filter under the car. So why do direct and port fuel injectors still become clogged or have spray pattern problems? The answer involves a little bit of chemistry and a lot of heat.

BMW Dual-Clutch Transmission Diagnostics

A DCT transmission uses the gearing principles of a manual transmission.

Simple Engine Fasteners Actually Complex Engineering Systems

Fasteners act much the same as a spring due to the physics of stretch and rebound.

Runners And Ports: How Modern Engines Manage Air

Variable-length intake runners change the length of the intake passages depending on engine speed and load.

Driveshaft Universal Joint Tips And Techniques

Before removing the driveshaft, check for play in the yoke and slip joint. If the u-joints are failing, you should be able to see movement in the shaft as you apply leverage.

Other Posts

VIDEO: Best Practices For Turbocharger Life

Doug Kaufman discusses some simple things your customers can do to ensure the longest life of their turbochargers. Sponsored by MAHLE.

Fuel: It’s The Tank, Not The Pump

One of the most basic procedures when replacing a fuel pump – and often the most overlooked – is inspecting the fuel tank.

VIDEO: Where Have The Fuel Pump Filters Gone?

Andrew Markel discusses how to diagnose a fuel pump, and the importance of replacing the entire module if the pump is failing. Sponsored by Auto Value and Bumper to Bumper.

The Next Evolution Of Fuel Injection

You may soon see a vehicle that has both direct fuel injection and port fuel injection. It could be a Toyota, Ford or other make. It can be confusing because for a long time we were told that direct fuel injection was better than port fuel injection. To get the best power and economy from an engine, some engineers realized that both injection systems could be used on the same engine.