CARB to Enact Tire Pressure Regulation – UnderhoodService

CARB to Enact Tire Pressure Regulation

The Automotive Maintenance and Repair Association (AMRA) reports that the California Air Resources Board (CARB) has proposed an effective date of September 1, 2010, for the adoption of Section 95550 in Title 17 of the California Code of Regulations.

The Automotive Maintenance and Repair Association (AMRA) reports that the California Air Resources Board (CARB) has proposed an effective date of September 1, 2010, for the adoption of Section 95550 in Title 17 of the California Code of Regulations.

This regulation will require automotive service providers to check and inflate the tires of each passenger car brought in for service to its recommended tire pressure rating. This will be required in order to reduce greenhouse gas emissions from underinflated tires.

Among the requirements automotive service providers will be expected to meet are checking and inflating each vehicle’s tires to the recommended tire pressure rating at the time of performing any automotive maintenance or repair service, as well as indicating on the vehicle service invoice that a tire inflation service was completed.

On March 19, the California Office of Administrative Law (OAL) disapproved the CARB’s proposed adoption of Section 95550. The OAL cited the CARB’s failure to comply with the clarity and necessity standards of Government Code section 11349, a failure to follow the required procedure, and the fact the regulatory file did not contain all required documents. These requirements have since been met.

For questions related to the CARB regulation, contact Theresa Anderson at 916-445-2159, or by e-mail at [email protected].
 
Following is a summary of the requirements and compliance deadlines necessary for all automotive service providers in California. A full copy of the regulation can be obtained by contacting AMRA at [email protected], or by calling (703) 532-2027.
 

You May Also Like

Chrysler’s Totally Integrated Power Module Simplifies Circuits

The symptoms of a failing TIPM can vary depending on the vehicle. Check out your options for this repair.

TIPM is a fuse box, relay box and electronic module all in one. The electronic module is connected to several data networks.  For engineers, the module reduces a lot of wiring under the hood and passing through the firewall. The TIPM also increases the functionality of a component by allowing several inputs to control one component. 

Trakmotive Tech Tip: Window Regulator Installation

Here are eight tips to make your next window regulator replacement easier.

Multi-Spark Ignition Systems

You may have seen the stories about plasma or laser ignition systems that promise to give new life to the internal combustion engine. But while these ignition systems have yet to make it to market the latest ignition innovation still uses a coil and spark plug.

VIDEO: How Modules Manage Alternator Power

Andrew Markel discusses power flow through the electrical system on a vehicle, and how the modules help provide the right amount of power to different components. Sponsored by Valeo.

VIDEO: Checking Key Fob Signal And Operation

Doug Kaufman discusses how to diagnose key fob issues, from fixing low signal to learning new fobs after they are lost or failed. Sponsored by Blue Streak.

Other Posts

Caring For AGM And Flooded Car Batteries

Loose, corroded or damaged battery cables make poor electrical contact and can cause a battery to run down.

Power Window Regulator and Motor Service

Power windows are great as long as they roll up and down when commanded to do so.

Battery Charging and Diagnostics

Here are six tips to use when diagnosing a vehicle with a dead battery. 

Power Window Regulator Replacement

Blindly replacing a window regulator and motor assembly may not solve a customer’s problem.