Bendix Gives Update On EPA Copper-Free Brake Plan

Bendix Gives Update On EPA Copper-Free Brake Plan

Current and forthcoming brake pads provide compliance as older friction becomes obsolete, says Bendix.

With the first phase of the Environmental Protection Agency’s (EPA) Copper-Free Brake Initiative coming to a close at the end of the year, Bendix Commercial Vehicle Systems LLC reminds fleets and owner-operators to make sure they’re keeping up with the necessary changes in aftermarket air disc brake (ADB) friction formulation. Bendix was already offering compliant friction years ahead of the 2021 deadline, but some older, noncompliant pads will no longer be available.

“It’s important that fleets, distributors, and everyone who does brake pad changes is aware of what’s going on with various Bendix replacement pads and labeling,” said Keith McComsey, Bendix director, Air Disc Brake & Systems. “And with the significant increase in ADB adoption over the past decade, there’s a particular interest in ADB pad changes.”

The Copper-Free Brake Initiative

Almost six years ago, in January 2015, organizations within the automotive and commercial vehicle industries – including trucking – signed onto the Copper-Free Brake Initiative, along with the EPA and the Environmental Council of the States. This action was taken because copper from stormwater runoff can be harmful to the environment, affecting plants and animals – and when used in brake pads, it makes its way into the air and water through the fine dust released from friction during braking. (Copper is not the only material covered: The agreement also reduces the use of other substances in brake pads, including mercury, lead, asbestos, chromium-six salts, and cadmium.)

While those dust particles may not seem like a big deal, they add up: In 2010, according to EPA estimates, vehicular braking in California alone released 1.3 million pounds of copper into the environment. That year, both California and Washington passed laws reducing the amount of copper permitted in brake pads – a move that Bendix commended for its positive environmental impact. Even then, most Bendix brake friction was already compliant with the requirements that wouldn’t take effect for several years.  

The Copper-Free Brake Initiative agreement outlined changes to come in the composition of brake friction nationwide: A-Level compliance started Jan. 1, 2015; the legal maximum amount of cadmium in a brake pad formula could be no more than 0.01% (one-hundredth of 1%) of its weight. For asbestos, chromium-six salts, lead, and mercury, the limit was 0.10% – one-tenth of 1%. Copper limits were not specified as part of A-Level compliance.

Second Phase and Bendix ADB Changes

B-Level compliance (or the second phase of the agreement) takes effect Jan. 1, 2021, and limits the amount of copper to no more than 5% by weight. Other material limits remain unchanged. In January 2025, copper’s limit will drop to 0.5% – one-half of 1% – by weight for N-Level compliance. The agreement also commits participants to taking steps to educate the automotive and trucking industries on the changes, and provides guidelines for marking and labeling friction material packaging and products. 

“Even though many Bendix friction materials have been compliant with the 2021 standards for a long time, some older aftermarket ADB pads will be phasing out of compliance at the end of the year,” McComsey said. “For customers currently using these, we’ve been including postcards with the replacement kits letting them know about the change and pointing them to the compliant friction.”

The A-Level-compliant frictions, which include both the Bendix BX275 OE-level friction and the aftermarket BA235, will become obsolete. The suitable B-Level copper-compliant replacements are the Bendix BX276 and BX283 pads, which are OE-level pads already available in the North American market. Both will remain compliant through 2024, while providing longer friction life and meeting FMVSS-121 stopping distance and park hold requirements. Bendix will also launch the BA236™ pad in 2021, an aftermarket friction that will be B-Level copper-compliant through 2024.

Bendix parts and replacement kit numbers involved are:

BX275 (K070796) – obsolete Dec. 31, 2020

BA235 (K182235) – obsolete Dec. 31, 2020

BX276 (K129276) – available; compliant through 2024

BX283 (K109113) – available; compliant through 2024

BA236 (K182236) – coming in 2021; compliant through 2024

“When Phase 3 of the initiative rolls around on Jan. 1, 2025, Bendix will be ready for that too,” McComsey said. “We’re already engineering copper-compliant ADB friction for the most stringent level, with plans for production to begin well in advance of the deadline.”

You May Also Like

Continental Releases 67 New Part Numbers

Twenty-two new import part numbers, as well as 39 new pulley and tensioner part numbers, are immediately available.

Continental announced a continued development of its import line of products with the addition of 22 new part numbers, as well as the expansion of its metals program, including 39 new pulley and tensioner part numbers. The new product line extensions are immediately available, Continental said.

39 Tensioners and Pulleys

Standard Motor Products Introduces 268 New Numbers

The release provides new coverage in 75 product categories and 80 part numbers for 2023 and 2024 model-year vehicles, SMP said.

BCA Bearings Unveils 2024 Endless Summer Promotion

The Endless Summer promotion runs from May 1 through June 30, 2024.

Clarios to Supply High-Performance AGM Battery to Major OEM

It offers up to 80% reduction in CO2 emissions over traditional AGM batteries, in many cases, Clarios said.

Philips Announces GoPure GP5212 Automotive Air Purifier

It uses a 3-layer filter to deliver cleaner, healthier, fresher air on the go, Lumileds said.

Other Posts

Please Take Our Brakes/Rotating Electrical Survey

By entering, you’ll have a chance to win a $100 gift card or one of 10 $25 gift cards!

Ford Maverick Hybrid With Grabby Brakes and DTC P0402

To correct this condition, reprogram various modules one module at a time.

Snap-on Announces Latest Software Release

The latest software includes new coverage and guided component tests and features.

AACF Launches 65th Anniversary Fundraising Initiative

The campaign aims to raise $65,000 through 1,000 donations of $65 each.