Being A True Professional – UnderhoodService

Being A True Professional

In the automotive repair profession, ASE certifications, manufacturer certifications and years of service are just some of the ways to distinguish one as a pro vs. a parts-swapping technician. I try to approach each and every job as a professional. This includes detailing my ­repair work and striving to make each repair as neat and orderly as possible.

In the automotive repair profession, ASE certifications, manufacturer certifications and years of service are just some of the ways to distinguish one as a pro vs. a parts-swapping technician.

I try to approach each and every job as a professional. This includes detailing my ­repair work and striving to make each repair as neat and orderly as possible. (Sloppy work usually means sloppy results.) It doesn’t matter whether the job is for a customer off the street or for another repair shop, it’s important that you do the most professional job possible to establish your reputation.

I recently got a car from a small motor swap shop that I used to visit once in a great while. They never sent me a lot of work, but their techs would call me constantly asking for information on how to repair something — a very rude practice, in my opinion. 

Grudgingly, I told them I would look at this one particular car, even though it didn’t sound like one I wanted to deal with. The car had a zillion miles on it with a turbo/intercooler engine under the hood. The car definitely had seen better days.

While checking under the hood, I found a lot of new parts slapped on and several things that were out of place, most of which were not fastened down correctly with their retainers or clips. You could tell they had no idea what was wrong or what they were doing, and that they were only throwing parts at it hoping it would start.

The first thing I found was several wires that were poorly spliced together, and most of the ­relays were dangling off their brackets. I had to fix the wires before I could check the rest of the systems. The main complaint was that the fuel pump wasn’t coming on. They had already replaced the fuel pump relay, and even though it had all the correct signals (at the relay), it ­refused to cooperate. I found something that I rarely see — the relay was assembled backward. For now, the easiest solution was to reverse the leads at the relay. 

Once I switched it over, the car started. It ran terrible, the service light was flashing and a ­misfire code was stored. Upon further diagnosis, I found a broken wire at the #1 coil. I had the scope hooked up to a pressure transducer, and it was showing some weird exhaust pressure readings. Sure enough, a compression test on one of the front cylinders confirmed my suspicion: the converter was also clogged.

All the intake bolts, intercooler bolts and fasteners had never been properly tightened. Instead of pulling the intake section and intercooler lines off to get to the #1 cylinder and fix the wire, I thought it was time to call these guys and give them the news. 

“We can handle it from here,” they told me. 

They paid for my time, and, as expected, it wasn’t long before they needed more help. I could tell there was already some tension from the tone of their voices on the other end of the phone, and I was going to be the scapegoat for this car’s demise.

“I’d check the fuel pressure since it sounds like that might be part of the original problem, before all this other stuff went wrong,” I told him before he rudely hung up the phone.

I always thought these guys were a little shifty, and it wasn’t long before I found out for sure. The owner turned out to be just as unprofessional as his hired hands. What was my clue? He stopped payment on my check.   

I was furious. But, I cooled down a bit and did not stoop to their level. Let’s be professional about this, I told myself. I kept my cool and called them.

My comments went like this: “I’m not here to lie, cheat or steal, and I’ve never done that to you or anyone else. Your lack of handling things in a professional manner portrays the caliber of a person you really are. If you had a problem, all you had to do was call me or bring the car back. But, trying to save a few bucks on your part, after the effort I put in, is not acceptable. I don’t want your money. I also don’t want your techs calling me to pick my brain for answers. It’s not about the money now; it’s about the ­principle.”

I said my peace and hung up the phone. Case closed. Shops like these give the rest of us a bad name.

I felt 100% better after handling it this way. I didn’t see any reason to stand there toe-to-toe, and try to get compensated for my professional time. My professionalism means more to me than a few bucks. Let’s face it, for a repair shop to insult ­another shop, especially when they couldn’t figure out the problem on their own, shows that their true colors definitely came ­shining through.

You May Also Like

Artificially Generated Customer Service

As easy as it is to TALK about customer service, actually offering it is NOT automatic. 

Good customer service is essential for any business, but it is particularly critical for automotive repair shops. 

For most people, their vehicles are their primary mode of transportation, and they depend on them for daily activities such as work, school, and errands. Therefore, when a car needs repairs, customers expect to receive excellent customer service to ensure that their vehicles are in good hands. 

Engine Bay Covers: Cosmetic or Comedic?

Each year, it seems engine bay covers get bigger and more difficult to remove.

Goofy Traffic Laws

Here are some of the wackiest rules you might not have heard about in Driver’s Ed.

Goofy Traffic Laws

Here are some of the wackiest rules you might not have heard about in Driver’s Ed.

Catalytic Converter Theft Update

Converters are still being stolen at record rates.

Other Posts

Throttle-By-Wire Diagnostics

Throttle-by-wire systems proactively manage the air and fuel going into the combustion chamber.

Acura Turbo Engine Service

It is important to check the operation of the solenoids that control vacuum to the actuators.

Solving Intermittent Overheating

New cooling systems anticipate and influence changes in coolant temperature.

Ignition Systems

The ignition coil is a very simple and robust circuit.