5 Tips For Vehicle Storage

5 Tips For Vehicle Storage

Improper long-term storage can lead to engine and cylinder surface rust, as well as carburetor and fuel issues. Preparing for long-term storage is the best rule of thumb in case of an emergency or a change of plans.

Sponsored by NGK Spark Plugs


Whether it’s a classic car, jet ski, snowmobile or a motorcycle, applications that are not used year-round still require attention. Traditionally, short-term storage is 3-6 months. Anything longer than that is considered long-term storage. Improper long-term storage can lead to engine and cylinder surface rust, as well as carburetor and fuel issues. Preparing for long-term storage is the best rule of thumb in case of an emergency or a change of plans.

Because proper care is more than just storage, be sure to ask your customer how they store their vehicle and provide the following maintenance tips:

1. Spark plugs: Encourage your customer to perform regular maintenance. In many cases, maintenance on a non-automotive application requires the changing of filters, spark plugs, fluids, and even tightening bolts.

For customers that have tried DIY-ing and are using spark plugs that are subpar to the original equipment, remind them that this can lead to problems with reliability. The OE plug was developed and designed specifically to meet the original engine manufacturer’s specifications. Make sure they use the OE or OE equivalent plugs for their vehicle. Deviating from the OE plug could also be an indication that a customer may be trying to correct a larger problem, and that should be addressed separately.

2. Battery chargers or maintainers can plug right into a wall and are an inexpensive way to keep a battery charged long-term. In some cases, it might be best to disconnect the battery altogether.

3. Fogging oil is extremely important when it comes to storing a vehicle, bike, snowmobile, etc. It will protect everything in the intake and the exhaust inside the cylinder head from rust. Fogging oil should be sprayed into the intake until the engine stalls. After this, more oil may be sprayed down the cylinder through the spark plug openings for extra protection. This will prevent surface rust from forming while in storage.

Fogging oil is not to be confused with the protection provided by specialized plating on spark plugs. Such plating will only protect spark plug threads from rust, not internal engine components.

4. A fuel additive is recommended for long-term equipment or vehicle storage. This will prevent octane loss during the off season. If your customer has a plastic gas tank, all gas should be emptied from the system by running the engine until the vehicle stalls; then use fuel additive. If your customer has a metal tank, usually found in older vehicles, add the fuel additive to a full fuel tank to maintain octane levels and prevent rust from forming inside the tank.

5. Offer Services: Many technical steps need to be taken when properly winterizing or summerizing vehicles. Remind your customer that care is needed when performing these steps. For example, removing spark plugs to spray fogging oil into each cylinder can lead to damage from improper torque during reinstallation as torque values may need to be adjusted. If they are uncomfortable or unable to properly store their vehicles themselves, a professional technician is exactly what they need.

For more information about properly storing vehicles or about ignition products, please contact NGK’s Technical Support Team at 877-473-6767 ext. 2 or visit them on the web at www.ngksparkplugs.com.

You May Also Like

A Closer Look: Gasoline Direct Injection (GDI)

Gasoline direct injection (GDI) is used on most new vehicles and requires a different approach to diagnosis and service. GDI technology has been an integral part of helping to improve fuel economy while reducing emissions, and can be found on more than half of the U.S. fleet. In fact, the use of GDI engines has

Gasoline direct injection (GDI) is used on most new vehicles and requires a different approach to diagnosis and service. GDI technology has been an integral part of helping to improve fuel economy while reducing emissions, and can be found on more than half of the U.S. fleet. In fact, the use of GDI engines has grown by over 600% since 2010. This means that in the next five years, 42 million more vehicles with GDI will enter the Aftermarket “Sweet Spot” of 6-12 years old, during which their injectors and related parts may need to be serviced or replaced. While GDI systems have proved effective, these systems encounter specific failures and require an understanding of how they work and how to test them when they set a code.

A Closer Look: Electronic Throttle Bodies

A shop’s reputation is affected by things like accuracy of diagnosis, quality of the repair, and friendly service. Equally as important is the quality of the parts installed. If the shop does everything right, and the part fails, the customer will ultimately be upset with the shop. When a new part fails, the customer is

Enhancing Efficiency and Streamlining Operations: The Benefits of Utilizing Nexpart Multi-Seller for Repair Centers

In today’s fast-paced automotive repair industry, staying ahead of the competition is crucial for repair centers to thrive. One key aspect that can significantly impact operational efficiency and customer satisfaction is the availability of OE, Aftermarket, Heavy Duty & Salvage parts. Here are just a few advantages of incorporating Nexpart Multi-Seller, a cutting-edge parts ecommerce

Get your vehicle road trip ready with these summer tips 

Summertime is a great time to take your car out on the open road, but it’s also important to ensure that your vehicle is in tip-top shape. Regular preventative maintenance can help you avoid costly repairs and keep your car running smoothly. Make sure you’re ready with these helpful tips from Delphi Technologies. Chassis The

A Closer Look: Ignition Coils

OE coils are known for their high failure rates. Engine misfires, rough idle, a decrease in power under acceleration, poor fuel economy, and a check engine light are all signs of an ignition coil that has failed. Read along for more technical information on how to diagnose a failed coil, and why the original equipment

Other Posts

Ignition System Do’s and Don’ts

Why do ignition systems give technicians problems when diagnosing ignition-related misfires? The answer is that some technicians use tests that might give inconclusive results or do damage to the coil or drivers inside a module.

NGK Spark Plugs Expands Spark Plug, Ignition Coil Coverage

Expansion includes 15 new spark plug part numbers, many with high ignitability designs.

Training Opportunities for Service Advisors

Learn about the different resources available to educate service advisors on sensors and ignition components.

New ShopSquad Podcast Offers Interactive Tech Training Support

Watch Philip Austin from NGK/NTK and Doug Kaufman discuss management and technical challenges within the industry.