Underhood Service Advertise | Subscribe | Contact Us | About Us
Tech Topics > Block
Displaying 1 to 7 of 7 Items Page:      1   
Tech Tip: Cavitation - A Cooling System's Worst Nightmare
One of the main concerns created by cavitation is the erosion of the metal on the outside surface of cylinder liners.
 More»
article image
Tech Tip: Liquid Tools Tip
Each side of the engine block has four main bearing cap side bolts that hold the bearing caps to the side of the engine block. The bolt threads, howev...
 More»
article image
Tech Feature: Straight Up Look at the Vortec 3500 Straight-Five Engine
The five-cylinder was seen as a way to achieve better fuel economy and performance than the six, but with more power and torque than the four.
 More»
article image
Cylinder Head Sealing – Gasket Surface Machining Is The Most Critical Area of Cylinder Head Repair
Early this year, I had a chat with a technical representative for a major aftermarket gasket manufacturer who shed some light on some of the problem...
 More»
article image
Directions: Performance Powered - Chevrolet Celebrates 100 Years
For its first 40 years, Chevrolet seemed content designing, building and installing four- and six-cylinder engines in its ­vehicles. But all that chan...
 More»
article image
Tech Spec: Tackling Old Timers - Salvaging Pre-War Era Engines
It's often surprising to some people that parts for these cars are still available. For other engine specialists, it's sometimes more surprising when ...
 More»
article image
Tech Tip: Lifter Bank Angles of a Chrysler 'A' Block
The latest version of Chrysler's "A" engine block features a different lifter bore angle. This block is commonly called the "R" block.
 More»
Displaying 1 to 7 of 7 Items Page:      1   
 
Underhood Service on Facebook
© Copyright 2012 Babcox Media, Inc. All Rights Reserved
•
3550 Embassy Parkway, Akron, OH 44333
•
330-670-1234
•
(FAX) 330-670-0874