Oil Monitors: Talking To Customers About Life And Reality – UnderhoodService

Oil Monitors: Talking To Customers About Life And Reality

With today's vehicles, different makes and models have stark differences in component design and engineering. Likewise, the driving style between any two drivers on the road can be just as varied as the vehicles they own. So, the question then in the face of these variables is, "Why are most oil change guidelines still so uniform and generic?"

Oil capWith today’s vehicles, different makes and models have stark differences in component design and engineering. Likewise, the driving style between any two drivers on the road can be just as varied as the vehicles they own.

So, the question then in the face of these variables is, “Why are most oil change guidelines still so uniform and generic?”

Engine oil deterioration monitoring systems have been around for decades helping drivers know when it’s time to stop for an oil change, but there is still a good deal of confusion about system basics. 

You should know how these systems function in order to both service your customers’ vehicles and explain to them what they should know about the oil life in their vehicles.

What is The Average Interval Between Oil Changes?

Oil monitoring systems judge appropriate oil change intervals using oil deterioration algorithms that estimate oil temperature and engine speed. For example, driving at high oil temperatures will cause the oil to oxidize, meaning the oil will have a greater viscosity and its component additives will begin to break down. Conversely, driving at low oil temperatures will result in NOx, nitric and nitrous acid contamination. This contamination culminates in the production of low-temperature sludge. Therefore, how and how far a customer drives makes a major difference in determining when the oil will need to be changed. Vehicles in warmer climates that are used for highway driving are more likely to be able to go longer between oil changes — sometimes up to 7,000-12,000 miles depending on the vehicle. On the other end of the spectrum, some cars routinely driven short distances in cold climates may only be able to go 3,000 miles between oil changes. The average vehicle that is put through both highway and city driving conditions usually can last between 7,500 miles and 8,500 miles before needing its oil changed.

Resetting the System

After the oil is changed, you should immediately reset the system. Directions for how a particular model’s oil monitoring system works can be found in the service information, as well as the directions for how to properly reset the system.

Oil Life is Not Oil Level

Just because a customer’s car is equipped with an oil monitor doesn’t mean that they should forget where the dipstick is located. Oil monitors only monitor the life of the oil, they do not gauge how much oil is actually in the vehicle. Make sure your customer knows to regularly check the oil level in their vehicle between servicing.

The Use of Synthetic Oil

Oil life monitors are not sophisticated enough to know what type of oil the motorist is using. Although some synthetic oils may last longer than traditional motor oils, the oil life monitor will not be able to distinguish the presence of these synthetics, as these systems are calibrated off of factory fill requirements.

‘Tis the Season?

As mentioned previously, climate can dramatically impact how often a car’s oil needs to be changed. However, oil life monitors automatically adjust to changes in weather and climate so that neither the technician nor the customer need to worry about recalibrating these systems throughout the year as the weather fluctuates.

You May Also Like

Tools To Service Serpentine Belts

Servicing the serpentine belt on some vehicles is a tough task.

Servicing the serpentine belt on some vehicles is a tough task. Without the right tools it is almost impossible. Here are six tools your shop needs to make your next belt replacement more productive.

Don’t Fight It
If you are still fighting belt tensioners with 3/8” breaker bar and wrenches, there are better solutions. There are serpentine belt kits that can help you get the right angle and attachment point on a tensioner to remove the old belt and install the new belt.

Battery Charging and Diagnostics

Here are six tips to use when diagnosing a vehicle with a dead battery. 

Why Do Timing Chains Stretch?

As the timing chain wears, it can change the timing of the camshaft and crankshaft.

Carbon Deposits and Direct Injection Engines

The primary cause of these problems is that fuel and added detergents are not hitting the back of the intake valves.

Acura Turbo Engine Service

It is important to check the operation of the solenoids that control vacuum to the actuators.

Other Posts

Hyundai & Kia Hybrid Drivetrain

The Hyundai hybrid system has a motor control unit (MCU) and hybrid control unit (HCU).

Subaru EJ25 Head Gasket Problems

Most of the EJ head gasket failures occur around the 100,000-mile mark and start as a slow oil or coolant leak.

Honda Electronic Throttle Body Service Tips

Using care and following OEM procedures will help you to avoid unnecessary parts replacement and comebacks.

New Oil Specifications

Many 0W16 oils have a new donut certification mark on the bottle called API SN-PLUS and SN-PLUS Resource Conserving.